Hueforge escudo Sporting de Gijón
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Smart_Recycled Amarillo Transmission Distance: 9.3
PLA SILK GEEETECH ORO Transmission Distance: 0.9
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #15 (1.28mm) swap to Amarillo
At layer #22 (1.84mm) swap to ORO
At layer #26 (2.16mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
It has a size of 97.55x150 mm.
Filaments used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Smart_Recycled Amarillo Transmission Distance: 9.3
PLA SILK GEEETECH ORO Transmission Distance: 0.9
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments.
Swap Instructions:
Start with black
At layer #7 (0.64mm), swap to red
At layer #15 (1.28mm), swap to Amarillo
At layer #22 (1.84mm), swap to ORO
At layer #26 (2.16mm), swap to Jade White for the rest.
Boost Me (for free)
If you like my work, don't hesitate to give me a boost. thank you so much
If you like my work, please consider giving me a boost. Many thanks
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)