Two storage pots for Ikea Skadis pegboard, one small and one large.
Both size pots have the same size footprint but the small one is 55mm tall (internal height), and the large one is 105mm tall.
Both pots work using my Ikea Skadis clip design which just slot through holes in the back ready to hook on. The large one uses 3, whilst the small one uses 2.
The .gCode and .3mf files I've uploaded for each include the correct amount of clips as well as the pot itself, and I've also included the clips as a separate stl if you wanted to print extras.
You may want to just pop a drop of glue onto the clips when inserting them into the mount (and allowing to dry before fitting to the board) just to hold them in place better when doing so.
I hope you enjoy printing and using my design. To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood
If you're after other Skadis mounts, I've made a collection of my Ikea SKÅDIS designs here.