Eagle

This is my first attempt at making my own Hueforge and uploading as well, enjoy.

Project: Eagle.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 0.1
PLA Polar Brown Transmission Distance: 1.5
PLA+ Inland Orange Transmission Distance: 5.6
PLA Sunlu Pure Yellow Transmission Distance: 5.9
PLA Sunlu White Transmission Distance: 7.5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Brown
At layer #9 (0.8mm) swap to Orange
At layer #13 (1.12mm) swap to Pure Yellow
At layer #15 (1.28mm) swap to White for the rest.