Articulated Baby Water Dragon - Support Free - Print In Place by Zurlingo-3D

Zurlingo-3D

Toys & Games>Other Toys & Games

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 8% infill

Designer

6.6 h

1 plate

4.4(10)

Boost

131

Released

Description

3D MODEL DESCRIPTION

A fully articulated Dragon model with no support or post processing required.
-Perfect to give as a gift.
-Looks great with 'fuzzy skin' enabled in your slicer.
-Can be scaled up or down to suit your needs.

3D PRINTING SETTINGS

-0.4mm Nozzle Diameter.
-=<0.2mm Layer Height.
-10% Gyroid Infill.
-3 Perimeters or more.
-'Bridge Mode' On
-4 Top/Bottom Layers
-Use A Skirt Or No Build Plate Adhesion
-No Support

I recommend printing the first 10-20 layers slower than normal to allow the small parts time to cool.

Comment & Rating (13)

@thudson177

Print Profile

0.2mm layer, 3 walls, 8% infill

could've been the tri layer silk PLA but I had some issues printing with a failed joint and some bad adhesion late in the print

The designer has replied

@Zurlingo3D

Would you be kind enough to print it again in a non silk/tri extruded filament? - I'm interested to know if it's a bad profile on my part or bad filament on your part. The previous rating for this profile was 5 stars, so I'd like to understand what is at fault if possible? Thank you :)

@thudson177

Replying to @Zurlingo3D :

so I printed direct from the app, should I be modifying this at all?

@DaveM5581

Replying to @thudson177 :

For me the same, print directly out of the app with the same result. ok, I also used Bambu PLA silk. I try again later and dry out the PLA before. And as 3rd try I use basic PLA as well. Let's see. :)

@lilbunni

Print Profile

0.2mm layer, 3 walls, 8% infill

kids love the dragon they call it a derpy dragon because of the face. great detail!

@philipwaldram

Print Profile

0.2mm layer, 3 walls, 8% infill

This was my first print. I printed in 3 colours changing in layers.

@Greysonmardock

Print Profile

0.2mm layer, 3 walls, 8% infill

@user_1953838716

Print Profile

0.2mm layer, 3 walls, 8% infill

@dargoh30

Print Profile

0.2mm layer, 3 walls, 8% infill

@TandAranch

Print Profile

0.2mm layer, 3 walls, 8% infill

@steinmannro

Print Profile

0.2mm layer, 3 walls, 8% infill

@m.drozd.88

Print Profile

0.2mm layer, 3 walls, 8% infill

@neilskig01

Print Profile

0.2mm layer, 3 walls, 8% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.