NOTE! This model requires additional materials!
1.Spring
2.lubricant grease(suggestion)
11/19
Versions with springs of different sizes have been added.
The original S size is used by default. You can also select M and L sizes in the “option file” according to your needs.
When I was in school, I always liked to play with the buttons of the ball pen. It was such a feeling that I couldn’t stop using it!!
Until someone tells you you are too noisy hahaha.
I studied the structure of the ball pen and made it into a small button.
The assembly part only needs to be assembled from left to right in the order of 1. Body 2. Button 3. Internal structure 4. Spring 5. Base plate.
It is recommended to apply some 3D printer lubricant grease on the internal structure of the third.
Press the bottom plate firmly and rotate it counterclockwise to lock.
I use uxcell springs with a diameter of 6mm and a height of 15mm.(S size)
There is extra space in the design, as long as the height meets 15mm.
In addition, I have also prepared many different versions of text and graphics. You can choose the one you like in the “option file”.
Come and follow me and press this button!
----------中文解說----------
11/19
追加了不同尺寸的彈簧的版本.
預設使用S原始尺寸,根據需求您還可以再option檔案中選擇M與L尺寸.
我上學時一直很喜歡玩原子筆的按鍵.那種使用感覺讓人停不下來!!
直到有人告訴你你太吵了哈哈哈.
我研究了一下原子筆的結構並把它做成小巧的按鈕.
組裝部分只需要由左至右,依序地1.本體 2.按鈕 3.內部結構 4.彈簧 5.底板 的順序進行組裝即可.
建議在第三個內部結構上塗抹一些3D列印機潤滑油脂.
底板用力按壓後逆時針旋轉即可上鎖.
我使用的是uxcell的直徑6mm,高15mm的彈簧.(S size)
設計上有多餘的空間,只要高度滿足15mm即可.
另外我還準備了許多不同版本的文字與圖案,你可以在option檔案中選取喜歡的.
趕快跟著我一起來按這個按鈕吧!