Finger Treads XL

Finger Treads XL

Boost
90
123
44

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
2.8 h
1 plate
4.5(35)

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
3.1 h
1 plate

Boost
90
123
44
1
482
277
Released

Description

This is a slightly larger version of my Finger Treads model. I don't think it makes as good of a fidget, so I am going to leave it as its own model for now, but it still very satisfying to play with.

 

If you are having trouble with pin durability or parts fused together. This model is enough larger that it tends to be more forgiving.

There is a normal version with 0.2mm gaps between pins and holes, and there is an extra clearance version with 0.3mm gaps.

 

 

Here is a size comparison for reference. XL version top and original bottom.

Comment & Rating (44)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 3 walls, 15% infill
stiff at first but broke free eventually
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Was hard to free up but I did get it eventually thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Very nice model. It works like a charm
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
it printed out good very cool little print thank you
0
Reply
Hi Mott This one turned out even worse for me! I was able to remove the track from the main body, but the track won't move at all. I will try printing with a different filament and let you know.
The designer has replied
0
Reply
Sorry about that :( Did you try the looser clearance version of this model? Maybe its time to calibrate your printer and/or filament
0
Reply
Replying to @MottN. :
I only saw the one version of the model? also I have no issues printing anything else with tight tolerances…
0
Reply
Replying to @TaylorN :
In the raw model files (not the print profile) there is one that says extra clearance or something like that. It is 0.3mm clearance on all of the pegs
1
Reply
I just printed this with Hatchbox PLA and it won't break free and spin at all. I used the print profile from Makerworld and everything. Should the round gears spin on the backing frame? I'm trying the looser tolerance version now.
(Edited)
The designer has replied
0
Reply
yeah they should spin. sorry you are having trouble. The first things to try are to make sure your flow and pressure advance are calibrated for the filament. if you continue to have trouble you can try slowing your volumetric flow down a bit too, but you shouldn’t have to
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
The tolerances are a bit too tight.
The designer has replied
0
Reply
Try the looser clearance version. There is an STL if you download the raw model files.
(Edited)
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
fun little print. it was a little stick to begin with but once it was worked for a while everything worked out fine.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
👍
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Just a little hard to free up the motion
0
Reply