A1 Riser Drawer by fay3dlab

fay3dlab

3D Printer>3D Printer Accessories

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill

Designer

73.7 h

16 plates

4.9(64)

Extended bracket for AMS top mount REMIX

Designer

10.8 h

2 plates

4.9(12)

Extended bracket for AMS top mount REMIX

Designer

16.6 h

4 plates

5.0(3)

Drawer inserts with grid bottom

Designer

1.9 h

1 plate

5.0(2)

Click to see more

Open in Bambu Studio

Boost

1565

3406

277

363

1.8 k

355

Released

Description

So here is my version of the A1 drawer riser.. i was inspired by maCyo42 AMS riser.. so i kinda followed his style of designing them..

The riser fits with the A1 printer base and rises the printer about 95mm.. it comes with 2 drawers in front and another 2 drawers on the sides at the back as optionals.. Just print the panel provided if you dont want the drawers on the sides..

The riser is connected using long pegs.. but you can also glue the parts together

There are optional inserts for the drawers as well as the front drawer panels.. you can print the plain pattern or with the Bambu Lab logo.. the drawer inserts have 2 options.. Nozzle holder or just partition.. if you want to print it with a grid like mine.. you can see download the profile that i dedicated just for the inserts..

The risers are all ventilated so that air could pass through the bottom of the printer.. There are also 2 slots for buildplates..

And since you need to remove the rubber bumper on the back to insert the printer into the riser.. i made an optional print of the bumper integrated to the riser.. The bumper and A1 riser feet can be printed using TPU.. currently i'm just using a generic TPU 95A filament from local store..

Printed the whole riser using Bambu Lab PETG HF filament.. using grey, black and white.. you could change the black color to green to match the Bambu Lab theme color.. for the basic without the optional.. you'll need:

PETG HF grey - 1.5kg
PETG HF black/green - 150g
PETG HF white - 500g
TPU 95A - 50g

If you want to use the bambu filament.. please use my affiliate link to buy them..

PETG HF grey - https://shrsl.com/4oowx
PETG HF black - https://shrsl.com/4oox0
PETG HF white - https://shrsl.com/4oox5
PETG HF green - https://shrsl.com/4oox6

I also made a poop bucket that aligns to the A1 riser.. you can use 10mm neodyme round magnets to lock them in place.. I also added a poop guard so it drops down to the bucket.. both have the same design and look as the A1 riser..

I kinda like the riser since it makes the A1 printer slightly higher on my table.. so i dont have to bend so much trying to reach the printer..

Anyway.. i hope you'll like my A1 drawer riser..

I also made a LED version that has switches to control add-on LED light strips to the A1.. You can get it here at my shop..

https://buymeacoffee.com/fay3dlab/e/303781

Boost Me (for free)

If you'd like the model.. Please support me by boosting and following me on MakerWorld

If you would like to support me, you can join me on my buymeacoffee page..

By joining me as a supporter.. you'll be able to get behind the scenes information

on my current projects as well as future projects..

And if you're looking to sell my prints.. you can join my merchant membership tier as low

as USD10 a month..

Comment & Rating (277)

@HumaneCoder

Boosted

@fay3dlab Would you be able to modify this to work with this brace for top mounted ams?https://makerworld.com/en/models/462582#profileId-371091

(Edited)

The designer has replied

@fay3dlab

wooww.. that bracket is huge.. was it able to print right at the edge there.. @HumaneCoder i can remix it to fit with my riser.. but i'll have to split the bracket in 2.. and maybe make some grooves to connect them together.. i'll PM you the file to help test print if you're ok with that

@HumaneCoder

Boosted

Replying to @fay3dlab :

Thank you. yes it was able to print there. I'm trying to figure out your design and if I can add a support on the edge in front of the back drawers to support this. if I come up with something I will let you know

@fay3dlab

Replying to @HumaneCoder :

i have made a remix of the bracket.. there are the bambu version as well as happy飞机 version that you are using.. happy 3d printing.. pls like.. follow.. and boost if you like it..

@R404a33

good job 👍

(Edited)

@Ken_Kitashi

why the panda if a1 screen exists?

@R404a33

Replying to @Ken_Kitashi :

Larger screen, at eye level, more accessible functions and, incidentally, more fun. But not essential, I grant you.

@Ken_Kitashi

Replying to @R404a33 :

Sounds tempting. What kind of functions/features does it offer over basic screen? Is it worth getting?

@Hobbes82

@fay3dlab Can print this in PLA+ or PLA Pro instead of PETG? and can this work with Top Mount Enclosure? This is my A1 setup, can it work with this?

(Edited)

The designer has replied

@fay3dlab

i wouldnt recommend it.. cause the bottom gets hot when printing.. it might sag the riser

@fay3dlab

i dont have mine mounted on top.. but i think the bracket that holds it will be floating.. do you have the link to where you got the bracket? maybe i can download and test it

@Hobbes82

Replying to @fay3dlab :

@fay3dlab I believe we have communicate and you got the link. =)

@Mark3DPrint

Thank you

@Jake_0310

Boosted

Which model is this support for?

Show original

@Mark3DPrint

Replying to @Jake_0310 :

Bambu A1+ AMS lite

@grizzly_print

hi! Awesome setup! where can i find it?

@djxamac

Boosted

Incredible. Could an adapter be designed for the riser to make it compatible with the rotating vertical AMS mount: https://makerworld.com/en/models/796462?from=search#profileId-735644?

The designer has replied

Show original

@fay3dlab

I could try making it.. But I think the vertical mount will be unstable

@djxamac

Boosted

Replying to @fay3dlab :

Ah yes, why is that? It works on the feet. By providing support for the tube from the contact surface ("ground") and a larger tube, that should work, shouldn't it? I have the engineering ideas, but not yet in 3D ;)

Show original

@fay3dlab

Replying to @djxamac :

the vertical mount will be floating around 80cm from the ground.. you'll need to add like a screw extending to the ground to help stabilize the mount.. if not the whole vertical mount will hang on the z frame..

@SgtKBaker

Boosted

Looks amazing and everything fits together perfectly. Thanks for this awesome model, great idea and implementation. Used PLA +

@rpzz

Nice print! Did it work fine with PLA? I’m afraid to print it in PLA and get problems with the hot bottom

@SgtKBaker

Boosted

Replying to @rpzz :

Thanks! Yeah its holding up great with the Esun PLA+. Been a week so we will see

@AMyers97

Replying to @SgtKBaker :

is it still holding up with PLA+ ? I want to print it

@oilershockey199

Boosted

Will it work with this? mine has a little knob at the back

The designer has replied

@fay3dlab

Yes.. You do need to remove the rubber bump.. It's just double sided taped together.. I made a replacement tpu bump at the back of the printer that works the same as the bumper

@oilershockey199

Boosted

Replying to @fay3dlab :

mine doesn't come off

@oilershockey199

Boosted

Replying to @fay3dlab :

I'll have to get a picture of my actual printer I can't find one but no mine doesn't come off at all, it's full attached and not quite as big

@Fire2Ice

Boosted

Hi @fay3dlab , thank you for your work on this base. I find it fantastic. I finished assembling all the parts over the weekend and wanted to place the printer on it… However, my printer doesn't sit properly on the parts. When I look at the printer from the front, I can wiggle it slightly to the right and left. So it really tilts, Is this a known problem? Did I overlook something? I am grateful for any help. PS: In the image, I have drawn the "angle of rotation" showing how the printer can move on the riser

The designer has replied

Show original

@fay3dlab

The printer should fit into the riser.. Did you check under the printer if there is anything blocking it.. Share a pic of the top of your riser too..

@Fire2Ice

Boosted

Replying to @fay3dlab :

Yes I did. There are just the regular feets. I cant understand why it wont fit. I hope you can see something on the riser picture I attached what I'm missing.

@fay3dlab

Replying to @Fire2Ice :

Everything looks OK of your print.. The tilting is it just on the front? Or the whole printer is tilting? Maybe the feet is hitting the frame of the riser

@dommedruckt

Boosted

@fay3dlab I am currently printing the first parts. Where do the TPU feet go after that? I'm not sure about that yet.

The designer has replied

Show original

@fay3dlab

at the back.. cause you will need to remove the bambu bumper that is next to the heatbed wires.. my bumper should help replace it should you push your printer right back to a wall.. so your heatbed wires wont get squished..

@dommedruckt

Boosted

Replying to @fay3dlab :

@fay3dlab thanks, are the "Pegs" tight and loose with you? Mine are so loose that I would have to glue them, hence the question to you.

Show original

@fay3dlab

Replying to @dommedruckt :

It's slightly loose.. Glueing is a good idea.. Once you test fit everything first

@PandaGThrilla

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

stunning design and provides much needed force distribution for my A1 with the AMS top mounted. everything makes sense and assembles with ease. the only thing I couldn’t figure out is what is the large TPU rectangular thing for?