Halloween Jacko Killer Pumpkin Emblem Chain Link

Jacko the Killer Pumpkin big emblem with halloween colored chain links. Rock your Halloween in spooky style!

All the settings are set in the .3mf file, you will find the pumpkin emblem which you can adjust the size. Make sure to NOT select the chainlink RING when resizing the logo to avoid mis-sizing it. After sizing logo, just put the ring back up top into place.

You will find 2 colors of chain-links, orange and black.

You can build as many links as you wish, I normally build my alternating color chains 31 links + 1 link to attach to logo + 1 connector. so 32 regular links and 1 connector link. Check images to see how its all connected to the logo.

You'll see there is more links total than needed to build with, this is just in-case some are lost mid print. Just pop open the Bambu app click 'skip' and skip any chain links you may lose to avoid starting over. (you should use bambu studio to start this print, not bambu app)

Make sure your plates clean and will hold, I wouldn't recommend brim of any kind.

I do use the prime tower on the logo print.