Search models, users, collections, and posts
AMS side mount spool holder
Remixed by
IP Report
Print Profile(3)
Single color without logo 0.2mm layer, 4 walls, 25% infill
Designer
5.4 h
3 plates
0.2mm layer, 4 walls, 25% infill
Designer
5.9 h
3 plates
Single color with logo 0.2mm layer, 4 walls, 25% infill
Designer
5.5 h
3 plates
Open in Bambu Studio
Boost
131
408
12
8
272
93
Released
Description
Parts :
5pcs M4 X 16mm
2pcs 608 bearing
2pcs 3 x 8 mm wood screws
1pcs PC4 M5 PTFE connector
5pcs M4 hex nut
AMS:
There seems to be different versions of the AMS. So before you print the clamps, check the rib size of your AMS.
If you have 4 Ribs wich are 65mm - 86mm - 65mm appart, you can print the clamps like they are in the print profile.
If you have 6 ribs wich are about 45 - 43mm appart you have to just print the "Clamp_small_18mm" at least 3 times
Make the ptfe connector hole and the spindle holder hole connected to the mainboard to the desired size with a drill, the holes are marked on the mainboard !
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (12)