Baby Garfield (The Garfield Movie 2024) by VRsculpts

VRsculpts

Art>Sculptures

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

15 h

1 plate

4.8(113)

0.2mm layer, 2 walls, 10% infill

15.6 h

1 plate

4.9(7)

Variable layer height, 10% crosshatch infill, 2 walls

22.5 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

1060

1616

161

2.9 k

768

Released

Description

The baby version of Garfield from the upcoming moving. This is from the part in the trailer where Jon meets Garfield for the first time and asks him “you hungry little guy?”

Prints in place with no supports. Profile is set up to purge to infill with prime tower disabled, with a flushing volume multiplier of .6, I have found this to provide good print quality with least amount of waste. Printed on my A1 mini at .2 mm layer height which keeps the print time down. If you have more than 1 AMS you may want to print his snout yellow or a lighter shade of orange (fill bucket with edge detect turned off).

Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share!
https://www.patreon.com/VRsculpts

Comment & Rating (161)

@TOSHIRTCOM

The print profile is no longer public

ok j’ai inversé le blanc et le noir dans mon AMS :) mais le modèle est extraordinaire! je relance une impression avec les bonnes couleurs. merci !!!

Le Tanuki

hahahahaha

lol

Super cute model! When sliced I see the black areas reaching towards the center - is this the byproduct of "flush into infill"? I am asking because this seems to increase print time.

(Edited)

The designer has replied

@VRsculpts

yea flush into infill could be whats causing that. I don't tend to use that on my newer models, but I think its supposed to help cut down on waste. I also always print with a prime tower now that I understand what its for, just decrease the size of it from defaults a little

@erkishhorde

I think it's actually just a part of the painting in BambuStudio. It helps the colored parts stick to the rest of the model by increasing the surface area that is "melted" together. Butt joints like where filament meets on the same level do not make strong bonds and can be knocked apart with a little bit of force. The main strength is achieved by layer adhesion.

@HardwareMaster

how do you get the top so smooth? i am using X1C, I did the adaptive layering, not sure if did it right but clicked on adaptive then clicked on smooth, didnt play with anything else, not sure why your pictures look amazingly smooth vs mine?

The designer has replied

@HardwareMaster

Actually I first changed the size to 200% then changed it to 50%, maybe that’s why but did you do anything special in the settings which is not captured in the 3MF file?

@VRsculpts

What size are you printing him? This was one of my first prints on my A1 mini before I even knew what adaptive layers was, I think I used mostly default settings on everything. But it looks like you might be printing him at a reduced size.

@HardwareMaster

Replying to @VRsculpts :

that may be, I think I made it large first then made it small but maybe smaller than original size. I will try again. :)

@cesarbutiler

Print Profile

0.2mm layer, 2 walls, 10% infill

perfecto

@Seanjlamothe

Print Profile

0.2mm layer, 2 walls, 10% infill

Printed Great. Thanks for the upload.

The designer has replied

@Luc1f3r

thanks for rating 😀

@Michaju3d

Print Profile

0.2mm layer, 2 walls, 10% infill

I printed a small army

@user_671891537

Print Profile

0.2mm layer, 2 walls, 10% infill

kiddo want it in a different color

@user_1164503230

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Me Super encantó muy buena calidad de impresión y parámetros para su impresión. Eso sí tarda mucho y tiene mucho desperdicio hay que tenerlo en cuenta. Pero en si es algo bello.

@Lumbi77

Print Profile

0.2mm layer, 2 walls, 10% infill

Super cute, thx

The designer has replied

@Luc1f3r

Cool, thank you 😊

@user_424343344

Print Profile

0.2mm layer, 2 walls, 10% infill

Fantastic

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Knitted baby squid

trixs3D

860

1 k

Baby Groot

RuppiD

Cute little Baby Hippo

Pedderick Designs

671

1.1 k

Baby dragon postument

Burak19891