Cuba Clock

This is a model of the Cuban clock created using Autodesk Fusion. I've also uploaded the .f3d file if you'd like to make any modifications to the design. After 3D printing the clock insert the TPU washer ( link: https://makerworld.com/en/models/593329#profileId-515129) into the thread of the clock mechanism, then place the clock mechanism in the seat, making the thread come out from the front part of the clock. Then you need to put on the brass washer and the brass nut present in the mechanism package, tightening everything with a 16 socket wrench. To conclude you have to power the clockwork mechanism with an AA battery. The photos of the process are attached at the bottom of the description.

Links clockwork mechanism and AA battery:

Clockwork mechanism:

Link1: https://tinyurl.com/ypev4ze7

Link2: https://www.mitepek.it/it/orologio-con-movimento-al-quarzo-silenzioso-con-lancette-semplici-lunghezza-mano-piu-lunga-12cm-asse-centrale-16.5mm/

Link3: https://www.mitepek.it/it/orologio-con-movimento-al-quarzo-silenzioso-con-lancette-stile-antiche-lunghezza-mano-piu-lunga-13-asse-centrale-18.5mm/ (if the second link clockwork mechanism isn't available this is fine too)

AA battery:

Link: https://amzn.eu/d/52Gk9Ua