This is NOT my model - it is my profile to print the following model:
https://www.thingiverse.com/thing:2425586/files
The first plate is print-in-place (with supports) - I have no idea if it will work the way I've configured it, its there for the thumbnail in Bambu Studio, but I put some effort into it so it should print - I just haven't tried it. I printed the 2nd & third plates, with the model seperated from the base. The final plate is the original model files, both assembled and disassembled, for reference and is not meant to be printed.
Scaled up 200%. Supported as needed.
Four filaments - Red, Black, White, and Support. There is a 5th filament, its just a modification of the Black filament profile for the base, disabling the Aux fan for a couple dozen layers to prevent warping, because I hate brims.
You could print this without a Support filament I'm sure - just adjust the slicer values appropriately.
The pictures do NOT do this justice! The model is gorgeous, and highly detailed. To see the fabric texture of the suit requires the model to be scaled up (hence, 200%).
The primary filament I used is Paramount-3D Black Cherry PLA - and it just slaps. It has a depth of color that cannot be seen in the photos.
The black and white filaments were both PolySonic.