Sunlu AMS lite adapter by BRADCAD

BRADCAD

3D Printer>3D Printer Accessories

Print Profile(16)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.9(1.6 k)

Fast mode - 0.28mm layer, 1 walls, 10% infill

1 h

1 plate

4.9(61)

0.2mm layer, 2 walls, 15% infill

1.4 h

1 plate

4.9(37)

0.2mm layer, 2 walls, 15% infill

1.8 h

1 plate

4.9(36)

Click to see more

Open in Bambu Studio

Boost

1054

1771

2011

757

8.1 k

9.1 k

Released

Description

Converts 73.5mm (~3in) spools to 55mm (~2in) spools to work with the AMS Lite. Designed for fitting Sunlu spools that always slip off the AMS Lite system. You do not need to print support with this model. Feel free to remix for other spools!

Print at 15% infill. PLA will work great!
When assembling, you will need to bend the part inward. It will act as a spring to grip the spool. A tight fit is needed so it does not fall off the AMS lite. To take it out of your spool, push with 2 thumbs on the opposite side, and it should pop right out.

NOTE: Some rolls have draft (a slight taper) on the inside diameter walls. If the adapter does not fit well, try inserting on the other side of the roll.

Comment & Rating (2011)

@user_1463354526

Print Profile

0.2mm layer, 2 walls, 15% infill

works great for this unnamed random spool of black pla I had laying around! it actually makes it usable again.

@BRADCAD

Glad to hear it works and glad to help!

@shanerrrr

Print Profile

0.2mm layer, 2 walls, 15% infill

I have printed 4 of these for the A1 Mini. Since the core of the spool for Sunlu filament was too large, this print allowed me to properly mount my spools. Thank you for providing this!

The designer has replied

@BRADCAD

Thank you for sharing! I love getting to see others have successful prints that make printing even easier. Glad to hear they work well!

@belfastbiker

never used this printer or software before yesterday, and duplicated four of these on the printbed, I'll find out 4.5 hours later if that was a good idea or not....

@ssweat

works great i used 15% gyroid infill, thanks for the fast easy print file.. also i dont see a way to leave ratings.. some people have option i see

(Edited)

The designer has replied

@BRADCAD

@ssweat The rating might be if you used the same print profile. I didn't use gyroid infill, but your print looks like it turned out great! Thanks for sharing!

@Asthix

Print Profile

0.2mm layer, 2 walls, 15% infill

Fit 100% fine, following the isntruction, it only fit as said in one direction of the spool

The designer has replied

@BRADCAD

Glad it worked! What kind of filament did you use in the picture?

@swim_dx

Print Profile

0.2mm layer, 2 walls, 15% infill

Wasn't able to get it to fit before it broke. Thanks anyway

The designer has replied

@BRADCAD

Darn, may I ask what material and brand you were using? Maybe I can make a profile or a tweak to the design so that doesn't happen again

(Edited)

@swim_dx

Replying to @BRADCAD :

Sunlu matte black PLA

@BRADCAD

Replying to @swim_dx :

I've had good luck with Sunlu before, but some matte PLAs have weaker bending strength, so it's easier to snap. If you have another PLA or PETG to print with and that breaks too, let me know, and I'll work on getting a better profile for the part!

@slimshady

Print Profile

0.2mm layer, 2 walls, 15% infill

very tight to push through! One side cracked when doing so but I was being too rough with it. It's still connected and fits good on the AMS. no sliding off. this is a Sunlu PLA silk spool.

The designer has replied

@BRADCAD

Glad to see it works! If it felt like a super tight fit, try and insert it on the other side of the spool. Some spools have a taper on the inside and make one side fit differently

@slimshady

Replying to @BRADCAD :

thank you! I'll remember that for next time!