Search models, users, collections, and posts
Cloud Strife
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.5 h
1 plate
Open in Bambu Studio
Boost
3
7
4
2
8
4
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 191.67x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 1.5mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #11 (0.96mm) swap to Pure Yellow
At layer #13 (1.12mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (4)