Door hook for multiboard

This model allows to hang multiboards from doors. The default model is made for a door thickness of 40mm.

If you need a model for a different door thickness, you can click customize above and change the width of the gap. Note that you have to add a couple of mm for it to fit; I used a 44mm gap for 40mm doors.

For more information on the multiboard system by Keep Making, see https://www.multiboard.io.

Please note that this model is a remix, and not an official part of multiboard.

Print using 3 walls, 15% infill.

Changes:

2025-07: added parametric model