Lithophane Globe base - Bambu led lamp kit 001 compatible by KENPRINT

KENPRINT

Household>Decor

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 3 walls, 15% infill

Designer

2.3 h

1 plate

4.5(6)

Open in Bambu Studio

Boost

Released

Description

Lithophane Globe base compatible with Bambu Lab Led lamp kit 001

Print both halves and simply insert the led light kit into the lower half and screw it up into the upper piece

The lithophane fits snugly into the upper part with some force - no glue required

Comment & Rating (12)

@stevenokc1988

do you have a link for the led you are using?

The designer has replied

@KENPRINT

that particular one is available from bambu directly

@dtr4in

With doing the globe, do I glue it on to the base? I was wanting to have the globe and upper part of the base printed as one piece, the issue I was having is the orientation of the front of the globe so that when the light is screwed in, the cord is at the back. It would be good if I could add a small screw section to the globe (and base) so that I could easily quick change the globe if I wanted to. Especially as my kids grow up.

(Edited)

The designer has replied

@KENPRINT

you dont glue it in its a tight fit you just push it into location i also have a looser fitting base in my other models that uses 3 3d printed screws to hold the globe in place

@gunnarbuns13

Print Profile

0.16mm layer, 3 walls, 15% infill

really good piece

The designer has replied

@KENPRINT

thanks for the great feedback

@dtr4in

Print Profile

0.16mm layer, 3 walls, 15% infill

found it rather tight to screw together, but got there in the end

@KENPRINT

16/11/2023 Re-uploaded newer version that has the correct height cylinder to better suit the globe base any issues let me know and I will correct them as needed