BONE Valentine II

4 Colour Filament Painting

AMS-ready

For manual Swaps:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Tough Cream White Transmission Distance: 10

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to BambuLab Green
At layer #17 (1.44mm) swap to Orange
At layer #25 (2.08mm) swap to Cream White for the rest.

These Filaments are highly recommended.

If you want to use others: look at the Transmission Distance, it should be close.

If you prefer Black and White: Simply start with Black and swap to BambuLab Tough Cream White at Layer 15.

To me it`s still magic what this printer combined with hueforge can do.

Bone by Jeff Smith, this is Fan Art