Toverbal

This is a ball meant for the ball course (Maximus' Wunderball) in Toverland, Netherlands. I was inspired to make one of my own with one of the rides of the park inside of it. This ball is quite sturdy and can hold up to the abuse of running the course, or rolling it around your house. I would advise against throwing it.

Some of the parts may show signs of stuff that is missing. I also wanted to add the vehicles of Dragonwatch however this proved to be a larger challange than anticipated. This may or may not be added on a later date.

The pictures show roughly the process of putting the whole thing together. The pins are green to more clearly show where these are inserted. They require some effort to press into place (for the largest pin which holds the tower together you may need to print it smaller).

1. Attach both Dragonwatch pieces with the talles pin.
2. Insert the shorter pins into one of the outside pieces.
3. Put the Dragonwatch into one of the outside pieces.
4. Press fit everything together making sure that the tower stays in place.
5. Have fun!

Disclaimer: Might get stuck in the course as it was meant for wooden balls and this is much lighter!