Hey all! Here's another HF print this time of one of my favorite anti-heroes from the Marvel universe……….VENOM!!!!
photo was created using Night Cafe+Hueforge
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA+ Esun Pink Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #30 (1.4mm) swap to Ash Gray
At layer #36 (1.64mm) swap to Pink
At layer #42 (1.88mm) swap to Ivory White for the rest.