Bench O lantern

I like to print custom benchies for new filaments that loosely fit into a theme or color of that filament. I didn't find one that I particularly wanted so I modelled this for the upcoming competition using a few of the new PETG HF colors that I got from Bambu. In hindsight I would probably make the stem brown, but I only had green. It also prints well in PLA. Sadly, the teeth do require supports so it is not a true benchy but I am really happy with how it came out and the hat was a fun little addition that uses the smokestack.

If you want to put a hat on other benchies you might need to scale it down just a bit, from what I could test it is just a bit too large to fit inside a standard benchy.

Tested to work with PETG and PLA, I would recommend keeping the outer wall speed consistent with your overhang speed since it does not add too much time, but in doing so it will reduce the banding due to the difference in speed from the bottom to the top of the pumpkin.