Meet 'Medusa' - A unique bong inspired by the most famous monster in Greek mythology.
It has the name 'Medusa' embossed on the front, and an image of Medusa's head de-bossed in the underside of the base.
All 4 pipes are hollow and connect to the top and bottom bowls, for extra air flow.
Drop some ice in the top section for a nice smooth hit. It is essentially a percolator bong when ice is added.
Designed for use with these pipes and bungs:
https://amzn.eu/d/hq3GnId
I recommend cutting a pipe down to size and putting a 45 degree angle on the end with a file. Then face the 45 degree angle towards the bottom of the bong for optimal flow.
Thanks for looking! - Please check out my other designs via my profile :)
Prints with no support.
Recommended settings for making it watertight:
5 Walls
5 Top/Bottom Layers
20% infill
OR
100% Infill - This is the better option and only takes a little bit more filament.
0.25 or less layer height
I use a 0.5mm nozzle, but this shouldn't matter.
Print time on an Ender 3 S1 Pro with Sonic Pad - 100% infill, 0.25 layer height, 0.5mm nozzle - 5 hours 10 minutes and roughly 225g of filament.