Search models, users, collections, and posts
Anemometer
IP Report
Print Profile(4)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
5.6 h
1 plate
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
1.2 h
1 plate
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
1.7 h
1 plate
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
1 h
1 plate
Open in Bambu Studio
Boost
277
547
26
8
607
192
Released
Bill of Materials
List other parts
- Ball bearing x 1: 22mmdiameter
- M5screw x 1: -
- 8mm Hex nuts x 1: -
Description
Anemometer with three blades for fast use: Print and use. You only need a 22mm bearing with a hole large enough to fit a Metric 5 screw and 8mm wide hex nuts. The blades are fixed by the precision of the machine itself, so screws are not needed for attachment. However, glue can be applied if desired. Additionally, there are holes in the legs for attachment with screws between 2.8mm and 3mm in diameter. This model is highly efficient and adapts well to wind speed.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (26)