Pikachu Cartridge
Copyright Claim
Pikachu Cartridge
Boost
211
314
25
Print Profile(1)
0.12mm layer, 3 walls, 20% infill
Designer
9.2 h
3 plates
Open in Bambu Studio
Boost
211
314
25
9
418
125
Released
Comment & Rating (25)
All
Print Profile
0.12mm layer, 3 walls, 20% infill
My son loves his new Pikachu
0
Reply
Print Profile
0.12mm layer, 3 walls, 20% infill
good
(Edited)
0
Reply
Boosted
Print Profile
0.12mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.12mm layer, 3 walls, 20% infill
had slight bed adhesion issues first go, probably user issue, created a profile in bambu studio for AMS, and scaled it down to near Gameboy cartridge size and came out perfect. 4 on a bed on an A1 mini with colour. I'll add the profile when I get chance
2
Reply
Printed but the gap between the bottom of the cartridge still had floating string what am I missing. probably something I'm doing on my end so and from what I can see from others they are printing fine.
0
Reply
Boosted
BLOXDER!
0
Reply
Boosted
Awesomee!!!
0
Reply
Print Profile
0.12mm layer, 3 walls, 20% infill
beautifully made only small defect was in the hole to hang it but its not visible so doesn't matter
0
Reply
Print Profile
0.12mm layer, 3 walls, 20% infill
Printed well, some pieces are very delicate though and are easy to break when removing supports so be gentle :)
0
Reply
that looks rough
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld