CM Devil #15
Print Profile(1)
Description
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 0.8
PLA+ Numakers Dark Grey Transmission Distance: 4.8
PLA+ Numakers Lagoon Blue Transmission Distance: 4
PLA+ Numakers Nuclear Red Transmission Distance: 2.8
PLA+ Numakers Outrageous Orange Transmission Distance: 10
PLA+ Numakers Apricot Transmission Distance: 11
PLA+ Numakers Teal Blue Transmission Distance: 4.8
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 8 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #10 (0.52mm) swap to Dark Grey
At layer #13 (0.64mm) swap to Lagoon Blue
At layer #14 (0.68mm) swap to Nuclear Red
At layer #20 (0.92mm) swap to Outrageous Orange
At layer #22 (1mm) swap to Apricot
At layer #24 (1.08mm) swap to Lagoon Blue
At layer #25 (1.12mm) swap to Teal Blue
At layer #27 (1.2mm) swap to Lagoon Blue
At layer #30 (1.32mm) swap to Apricot
At layer #45 (1.92mm) swap to Pure White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)