Starwars

Project: join.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.2x199.8mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Bambu Red Transmission Distance: 4.2
    PLA Bambu Glow Yellow Transmission Distance: 6.7
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #17 (1.44mm) swap to Yellow

Border Only Colors from here until the end.
    At layer #27 (2.24mm) swap to Red for the rest.