Alex

cover

2024-09-02_3k3tzjj0oxq5.jpg

2024-09-02_cifesri4ovgz.jpg

img_0771.webp

2.jpg

1.webp

plate_1.png

2025-05-01 11_23_11-Intex Bestway swirl nozzle design for a clean pool by AlexMakerWorld_ Download F.jpg

0.12mm layer, 4 walls, 15% infill

2024-09-02_1738eaf83c93c

with supportlasts long if printed in PETG

PLA.webp

0.12mm layer, 4 walls, 15% infill PLA as support interface

2025-06-25 18_12_36-EeasySupport removal_TopZsupportIncreased - BambuStudio.jpg

distance.webp

Easy support removal - 0,275 Support Z distance

Volcano666

IMG_20260526_135436.jpg

IMG_20260526_135432.jpg

IMG_20260526_135429.jpg

<ul><li>This profile is specially optimized for dual-material printing using PETG as the main material and PLA as a dedicated support interface. Because PLA and PETG do not bond to each other, support structures can be removed effortlessly with zero residue, while print time and material waste are kept to a minimum.</li><li><h3>🛠️ Core Configuration Settings</h3></li><li><h4>1. Material &amp; Support (Multi-Material Settings)</h4></li><li>Main Filament (Model): PETG</li><li>Support Base/Tower: PETG (saves time and reduces filament changes)</li><li>Support Interface (Transition Layer): PLA (used exclusively where the support touches the model)</li><li>Prime Tower: Disabled (Off) &gt; ⚠️ Note: Since the prime tower is removed, all filament transitions rely entirely on the purging process.</li><li>Flushing Volume: Fixed at 608 (specifically tuned for transitions between PLA and PETG to completely prevent material cross-contamination and ensure structural integrity).</li><li><h4>2. Quality &amp; Strength</h4></li><li>Layer Height: 0.12 mm (Fine profile for high detail accuracy)</li><li>Wall Loops: 4 (Significantly increases part strength and compensates for the thin layer height)</li><li>Sparse Infill: 15% (The ideal sweet spot between strength and print time)</li><li><h3>⏱️ Optimization Highlights</h3></li><li>Reduced Print Time: By printing the support body out of PETG and only using PLA for the interface layers, filament changes are kept to the absolute minimum.</li><li>No Prime Tower: Saves additional time, filament, and build plate space. The increased flushing volume of 608 ensures a clean material transition directly through the purge chute.</li><li>Easy-Release Supports: PLA and PETG naturally have extremely poor adhesion to one another. Supports will practically fall off after printing, leaving a flawless surface finish on the model.</li></ul>

PETG + PLA Interface (Optimized)

with this nozzle you get circular flow in the pool instead of just straight in. It helps to keep the pool clean. Debree will be on one spot in the center so easy to take out.long lifetime if printed in PETG  <boostme><boosttitle>Boost Me</boosttitle><boostcontent>good print good boost</boostcontent></boostme>&nbsp;this is the counterpart <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1435915-intex-bestway-32mm-water-inlet#profileId-1493835">https://makerworld.com/en/models/1435915-intex-bestway-32mm-water-inlet#profileId-1493835</a>&nbsp;

Print Profile(5)

Description

Comment & Rating (248)

License

Remixes (1)

Related Models