Daredevil - Hueforge
Print Profile(2)
Description
Boost Me (for free)
Printprofil #1
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 180x180mm in size
Filaments Used:
PETG Kingroon Black
PETG Kingroon Red
PETG Kingroon Gray
PETG Kingroon White
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #15 (0.76mm) swap to Red
At layer #25 (1.16mm) swap to Gray
At layer #38 (1.68mm) swap to White for the rest.
Boost Me (for free)
Printprofil #2
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 180x180mm in size
Filaments Used:
PETG Kingroon Black
PETG Kingroon Red
PETG Kingroon Gray
PETG Kingroon White
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.84mm) swap to red
At layer #14 (1.24mm) swap to Gray
At layer #20 (1.72mm) swap to White for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)