space bookmark
Print Profile(1)
Description
Boost Me (for free)
please follow this:
slice first:
point 1: reduce only x and y axes and not the z axe.
point 2: slice the bookmark first :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150*70mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Kingroon Orange Transmission Distance: 4.6
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Orange
At layer #19 (1.6mm) swap to White for the rest.
To purchase a commercial license and sell my creations, access to my KO-FI SPACE
Alternatively, make a small donation here ko-fi https://ko-fi.com/ziakat
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)