Mini Spiral Tea Light Holder
Print Profile(3)
Bill of Materials
Description
Boost Me (for free)
If you enjoy my designs, you can support my work with a boost!
Commercial license available for Patreon supports.
Update: As requested by a user, I added a medium size version, which is between the small and large one.
A smaller version of my Modern Spiral Tea Light Holder. Prints in less than 2 hours.
I tested it with a real candle, but I strongly recommend using an electric tea light! If you want to use it with a real tea light, do at your own risk and print it using a flame-retardant filament.
This is a rather delicate print. For best results, make sure to print slow (140-160 mm/s with slower acceleration worked fine for me) and make sure seams are not on overhangs. I added a profile with 140 mm/s top speed and manually placed seams on the right corners.
Tested with Bambu Lab Matte PLA (Black). Other filaments might require even lower speeds for a good result. If you run into problems, you can set your printer into “Silent” mode to print even slower.
Some people had issues printing this, so I added a profile with even slower printing speed. For best results, make sure to not print too hot, and cooling is sufficient (leave door open on enclosed printers).
Membership
Get a commercial license for my designs by becoming an Authorized Seller!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (361)