Lighter Gun by Sakul

Sakul

Tools>Gadgets

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

3.1 h

2 plates

4.8(89)

A1 Mini 0.2mm layer, 2 walls, 15% infill

Designer

3 h

2 plates

4.5(2)

100% success

3.1 h

2 plates

5.0(4)

[M3 Thread Inserts] 0.2mm layer, 3 walls, 15% infill

2.8 h

2 plates

Open in Bambu Studio

Boost

1518

1892

157

145

3.1 k

1.3 k

Released

Description

Turn your conventional lighters into a fun lighter gun.

Simply place the lighter and trigger into one of the gun halves and close it.

The gun should work with most of the generic lighter shapes out there, but it needs to be one with a button.

I used self-tapping screws to close the two halves. For the top front screw hole you maybe want to shorten the screw to make it fit perfect.

The new Lighter Uzi has just been released!

Boost Me (for free)

If you like my work and want to support me, a Boost is greatly appreciated!

Bill of Materials

Bambu parts

BT3x5 SHCS Self Tapping Screw (20PCS) - AA199

B-AA199

× 1

BT3x12 SHCS Self Tapping Screw (20PCS) - AA109

B-AA109

× 1

Buy Now

Download BOM

Comment & Rating (157)

@MR3DMagic

I used a Bic electronic lighter with the longer tube. Had to remix the trigger to get it to work though. Also added heat insert nuts and machine screws. Still a work in progress.

(Edited)

@Mst3ch

looking forward to your remix

@kppate99

Could you post a link to your remix when you finish it please? I have the same lighter

@user_3200955799

Boosted

Replying to @kppate99 :

i got it to work with using folded paper as a shim behind the lighter.

@666.666.666

To facilitate later replacement of the lighter, I added a gap for the embedded nut through Boolean operations, paused printing when the layer was printed, and then embedded the nut. This makes it more durable than a self-tapping screw. Additionally, it is recommended to add some gaskets for different types of lighters.

Show original

@user_1022182655

Would you please share your remixed version with the bolts and nuts? I'd really appreciate it.

@666.666.666

Replying to @user_1022182655 :

I'd like to share my file with you, but I don't know how to send it to you. Let me describe my approach in detail: 1. Draw a hexagonal prism that needs to be the same size as the built-in nut, and then reserve the assembly gap. The assembly gap I left is 0.15mm. 2, copy four of these hexagonal prism, and according to the length of your hand screw, adjust to a suitable height. 3. Align these hexagonal pillars with the screw holes in the center (I am manually aligned), and then subtract these hexagonal pillars by Boolean operation. 4, when printing, first slice, only add the bottom support, not the internal support, and then right-click on the progress bar on the right side, add the layer of the printed nut area as the pause layer. 5, wait for the printer to pause, put the nut in, and click to continue printing. There you go!

@user_1022182655

Replying to @666.666.666 :

thanks for your description! Couldn't you just upload a remix of this model? I'd imagine that more people would be interested in it. Edit: I just found out it's not allowed to remix this model. thank you anyways, i managed to do it.

(Edited)

@SDDWX

My lighter is smaller, so I designed a small part to make it fit. If you need one too, you can download and print it. https://makerworld.com/en/models/638430#profileId-563994

Show original

@schiko

Print Profile

0.2mm layer, 3 walls, 15% infill

Works only with one of my three lighters. But I like it.

@EwanGai

Runs smoothly and can be assembled with ease using 1xM3*6, 1xM3*10, and 2xM3*14 screws. Use a knife to refine the grip and trigger areas for a more seamless experience.

Show original

@shaztech

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Perfect print !

The designer has replied

@Sakul

Awesome!

@Ben_HB

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Works great. Printed with cheap filament (Sunlu matte black).

@CelicaPetz

Print Profile

0.2mm layer, 3 walls, 15% infill

came out well,just need to find some Screws 👍

@LMaker87

Print Profile

0.2mm layer, 3 walls, 15% infill

really nice and funny

@lecram

Print Profile

0.2mm layer, 3 walls, 15% infill

hehe fire 🔥

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Turn your conventional lighters into a fun lighter gun.

The new Lighter Uzi has just been released!

Bill of Materials

Comment & Rating (157)

License

Related Models

Honeycomb Bic lighter case

Lighter Holder for IKEA Skadis

Fidget gun v1 (shoots)

Simple Lighter Holder for IKEA Skadis