Car Cup Holder Water Bottle Adapter (Fits with Boot!) [3.8 inch/95mm+98mm versions] by OtakuMx

OtakuMx

Hobby & DIY>Vehicles

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

98mm Opening - 0.28mm layer, 4 walls, 50% infill

Designer

3.4 h

1 plate

5.0(6)

96mm Opening - 0.28mm layer, 4 walls, 50% infill

Designer

3.3 h

1 plate

4.7(7)

Open in Bambu Studio

Boost

113

Released

Description

Inspired by Jagahati's model here.

I wanted a similar one that would fit a Hydroflask 32oz with a silicone boot. So I remade it and enlarged the opening to 96.5mm wide.

(3.8 inches)

Should fit most cupholders.

(Boot + bottle is 94mm - Normal bottle is ~ 91.5mm)

Highly recommend printing with the following settings:

4+ Perimeters.

50%+ Infill

.28 Layer Height

.5 Line Width

All of these will add to the strength of the print.

Comment & Rating (22)

@Fjrezes

Print Profile

98mm Opening - 0.28mm layer, 4 walls, 50% infill

98mm is perfect for my 32oz bottle with silicone boot. other store bought designs don’t fit with the boot. solid print with no issues

(Edited)

The designer has replied

@OtakuMx

Glad to hear you like it!!

@TLadd

My 40oz water bottle with a boot fit perfectly in the 95MM option. Thanks for sharing this, the file worked flawlessly with the creator's print suggested settings. Printed on X1C using Creality PETG Black.

(Edited)

The designer has replied

@OtakuMx

Fantastic print; thanks for rating and uploading the make!

@user_1583648355

Print Profile

98mm Opening - 0.28mm layer, 4 walls, 50% infill

Printed excellent through Bambu Studio with no changes on A1.

The designer has replied

@OtakuMx

Thanks for the rate! Looks great!

@Bozosdad

Boosted

Print Profile

96mm Opening - 0.28mm layer, 4 walls, 50% infill

Wife got new water bottle that was too big to fit in vehicles cup holder. This model fit the vehicle and the bottle perfectly. She loves it!

The designer has replied

@OtakuMx

So glad it works!

@user_1338920645

Print Profile

98mm Opening - 0.28mm layer, 4 walls, 50% infill

Thanks for sharing！👍

@zackparsadanov

Print Profile

98mm Opening - 0.28mm layer, 4 walls, 50% infill

REALLY NICE

The designer has replied

@OtakuMx

Thanks for the rate!

@wickisme

Print Profile

96mm Opening - 0.28mm layer, 4 walls, 50% infill

little heavy but should last a long time

The designer has replied

@OtakuMx

Thanks for the rate! I played around a lot with the weight vs thickness and found that without the thicker walls & higher infill it was prone to cracking; especially when you would grab the bottle out of the holder (like when you left the car -> Horizontal pull). So unfortunately it resulted in a heavier than anticipated holder; but i've had mine in my car in the sun for nearly a year and it's still working fine!

@markrdrew

Print Profile

96mm Opening - 0.28mm layer, 4 walls, 50% infill

Printed well, but was a touch tall for the cupholder so I ended up drawing my own using some of your dimensions and design.

@user_549761164

Print Profile

96mm Opening - 0.28mm layer, 4 walls, 50% infill

awesome print profile, no supports needed and came out smooth and sturdy. worked great for my buddy’s 40oz hydro flask in his Camry. thanks for a fantastic model!

@speeps

Print Profile

96mm Opening - 0.28mm layer, 4 walls, 50% infill

Printed great! I may have to adjust it a little bit later on to make it fit in my weird cup holder but the top fits my bottle perfectly. picture to come later.