4-color Hueforge Spider-man Poster by a.vdh_1983

a.vdh_1983

Art>2D Art

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

THICKER MODEL_0.08mm layer, 2 walls, 100% infill

Designer

6 h

1 plate

5.0(2)

Size 90% - 0.08mm layer, 2 walls, 100% infill

4.1 h

1 plate

4.9(16)

0.08mm layer, 2 walls, 100% infill

2.8 h

1 plate

Open in Bambu Studio

Boost

134

231

417

237

Released

Description

All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..

So, if you like my work you could

buy me a coffee if you like. 😉

https://www.buymeacoffee.com/a.vdh_83

Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.8
    PLA BambuLab Basic Red Transmission Distance: 4.8
    PLA BambuLab Basic Yellow Transmission Distance: 4
    PLA BambuLab White Transmission Distance: 9.6

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Red
    At layer #19 (1.6mm) swap to Yellow
    At layer #22 (1.84mm) swap to White for the rest.

Comment & Rating (81)

@AllanFonroques

Print Profile

0.08mm layer, 2 walls, 100% infill

I find the result magnificent! Thanks for sharing ! I resized it to 90% because I'm going to put it in a frame.

The designer has replied

@a.vdh_1983

don't forget to leave the z-axis the original size 😜

(Edited)

@AllanFonroques

Replying to @a.vdh_1983 :

Yes, that's what I did ;)

@meCoreyG

What frame are you printing..? I am looking for frames for my hueforge too.

@MakerThingy

Print Profile

Size 90% - 0.08mm layer, 2 walls, 100% infill

Just excellent, so good, thank you Followed the instructions and printed on the P1S with AMS, took about 3.5 hours, normal speed. (I did try to do it at Ludicrous and Sport, but those did not work :)

(Edited)