Eiffel Tower
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 120.12x200mm in size
You may print at higher layer heights below the minimum depth of 0.24mm
The maximum depth is 4mm and the Actual Depth is 4mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Hyper PLA White Transmission Distance: 9.2 (Canadian Filaments White PLA was used)
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Steel Grey
At layer #24 (2mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)