Search models, users, collections, and posts
Placodasoinus
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
10.9 h
1 plate
Open in Bambu Studio
Boost
3
4
0
0
1
0
Released
Description
Project: Placodasoinus.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 185.31x240mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3.2mm and the Actual Depth is 2.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Grey Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Grey
At layer #23 (1.92mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
There are no related models yet
Comment & Rating (0)