Search models, users, collections, and posts
Batman
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.8 h
1 plate
Open in Bambu Studio
Boost
14
26
0
0
5
1
Released
Description
Project: Batman thicker.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 201.48x240mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3mm and the Actual Depth is 2.5mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Jade White
At layer #20 (1.68mm) swap to Yellow
At layer #26 (2.16mm) swap to Black for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)