Shock absorber
Print Profile(1)
Description
Newer and improved slim version is out: https://makerworld.com/en/models/1909728-rc-shock-absorber-8c#profileId-2047748
I needed a custom shock absorber for my RC car, so I made one.
For the 20 mm part you will need a 35-40 mm compression spring and for the 30 mm part a 45-50 mm compression spring with a 0,8 mm wire diameter.
The guiding rod is a hex socket cylinder head screw M3 https://www.ebay.de/itm/162035060113?var=461004073200
I recommend that you use an M3 insert, a 35mm screw for the 20mm cylinder and a 45 mm screw for the 25/30 mm cylinders.
When done with assembly superglue the cylinder cap on the cylinder.
Modified shock cap to fit an M3 brass insert https://www.ebay.de/itm/303614023248?var=602850729491
Added a slim version of the cylinder and shock cap (for use with a ball point pen spring)
Assembled slim version should have ~500g resistance
print at 100% infill, 0.1 resolution
Have fun ;)
If you like my 3D models, think about following me, I always have something cooking :)) in the mean time enjoy this model. Thanks!!
"Fuel for the Factory" – Keeping the printer (and the person) running at 100% https://ko-fi.com/abe3d
Boost Me (for free)
....or not.... It's up to you! Have fun!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)