cover

79_0.jpg

78_0.jpg

Screenshot 2024-08-25 150157.png

plate_1.png

2024-08-25_78ce35b3aa41c.jpg

0.2mm layer, 2 walls, 15% infill

plate_2.png

plate_3.png

plate_4.png

nolanhuynh79

20250221_173807.jpg

20250221_173200.jpg

20250221_173332.jpg

20250221_173502.jpg

20250221_173222.jpg

20250221_173435.jpg

Hello ALL!!! If you&#39;re feeling like you&#39;d like a VERY large version of E23 @user_1257825035&#39;s venom, This version is for you!  The CATCH… To complete this print, will require about 48 hours of your printers life and pretty much 1 KG spool of precious filament! =)  I have optimized ALL supports and settings to have a very nice finished product, so minimal to no adjustments should be required.   Just slice and print!!!  You will need some glue to assemble it afterwards.  I personally printed with Flashforge PLA-CF black which is a fantastic material and awesome surface finish, but I havent tried it in any other material since it was a one shot print from start to finish.  I believe it should be fine to use other materials though.  Model stands about 16 inches (40cm) tall.  Hope you all will enjoy this fantastic print I modified and optimized!!!  ***THE HARDEST part about the whole print was the head support removal from the teeth and mouth… just be patient and careful with it and it will be great in the end!!!******PLEASE have a clean build plate before each print!***

0.16mm layer, 2 walls, 10% infill, LARGE, optimized support

printed

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

done

plate_10.png

plate_11.png

plate_12.png

plate_13.png

dekel

WhatsApp Image 2026-03-27 at 22.50.49 (1).jpeg

WhatsApp Image 2026-03-27 at 22.50.49.jpeg

sliced to be ½ real life size - 90 CM on 12 plates head is colored using 4 different colors - mouth, tongue, eyes, head alignment connectors on some of the parts, although i usually ending up not using them.  glue is needed - also note that with such large models. sometimes you need to sand it down slightly to have a better fit  additionally, bad adhesion on the very large part (like the torso) are important so it wont distort very low infill to save up on filament the multi colored head is a LONG print - 40hours on an A1 with AMS, but well worth it as it looks great.  the current colors are for “Reverse” venom, but you can easily recolor to have the original venom colors.  overall print is only around 3kg.  *the model in the images was printed on a Bambu A1 with an AMS light. no sanding was used. had to reprint the torso because of surface distortion due to bad adhesion issues, but generally although a massive sized model, its not a difficult print.

1/2 life size scale (90cm tall) - multi/single colored head

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Venom

ASIA

Print Profile(3)

Description

Comment & Rating (94)

License

Related Models