Madballs Skull Face Hueforge

Madballs Skull Face from the mid 1980s. 179x179 to fit for all printers.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 179x179mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.7mm and the Actual Depth is 2.7mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ IIID Max Red Transmission Distance: 4
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black
At layer #8 (0.8mm) swap to Red
At layer #16 (1.44mm) swap to Pure Yellow
At layer #24 (2.08mm) swap to White for the rest.