RepRack Remix for 1" diameter tube Remixed by KB Printster

Remixed by

KB Printster

Tools>Organizers

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.24mm layer, 2 walls, 30% infill

Designer

1.9 h

1 plate

5.0(2)

Boost

Released

Description

This is based off the reprack system. I had some 1" tube laying around but couldn't find any files that were shared with the reprack system and a 1" diameter so I made one. The holes are 26mm to give a little wiggle room for the bars.

Once I finish the rest of the files that go along with this I will upload them. Happy Printing!

Update:

There is now a right and a left bracket.
I added an endcap - this endcap may or may not work for your particular bar stock or rod type you are using. I have attached the CAD file if you need to adjust your tolerances.

In Progress

Working on 1" Slip covers
Testing Rack Cleats

Comment & Rating (6)

@stircwazy

Print Profile

0.24mm layer, 2 walls, 30% infill

Had to make some slight modifications for my need since I'm using 3/4" PVC but base design fits and works great.

The designer has replied

@KBPrintster

Awesome! I'm glad it works for you! Thank you for the feedback!

@hellonearth8420

Print Profile

0.24mm layer, 2 walls, 30% infill

Great print

The designer has replied

@KBPrintster

Thank you!

@user_3682193348

1 hole is smaller than the other i had some 1 in conduit laying around printed 1 bracket check the one hole and it was perfect with a little play and then print it two more and then realized the other hole is too small

@user_3682193348

all of them r different sizes, only 1 side has 1 hole thats 30mm and thats the left one

(Edited)

No more