Search models, users, collections, and posts
Flora #9
IP Report
Print Profile(1)
0.04mm layer, 2 walls, 100% infill
Designer
8.3 h
1 plate
Open in Bambu Studio
Boost
3
4
1
2
4
3
Released
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.3mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 0.8
PLA+ Numakers Dark Grey Transmission Distance: 4.8
PLA+ Numakers Light Gray Transmission Distance: 3.2
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #10 (0.52mm) swap to Dark Grey
At layer #17 (0.8mm) swap to Light Gray
At layer #19 (0.88mm) swap to Pure White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)