Oversized Charmander Pokemon Card - Hueforge Hybrid

An oversized Charmander Pokemon card, and completely 3D printed, and print in place! This is another Hueforge hybrid print that uses filament painting methods and traditional 3D printing to create a combined pop-art effect piece.

This took 5 hours on my Bambu Lab P1P, using 4 different filament colours with orange repeated for Charmander at the end of the print. If you do not have an AMS, no fear! Just download the 3MF file and instead of a filament change, insert a pause at the correct layer heights and manually load and unload the filament spool yourself before resuming the print.

It is large, at 170mm x 240mm in size. If you have to resize it to fit your printer bed, please only scale the X and Y dimensions, but do not alter the Z dimension, otherwise the layer swaps will be inaccurate.

If you are using the Makerworld One-Click printing, all settings will have been applied to this print, and you can just hit Print. If you do not want to use that, please download the 3MF file, or the STL and apply the recommended settings below.

Print Instructions:

1. The Hueforge portion of the print (0mm - 2.48mm) should be printed at 100% infill, at a 0.08mm layer height with 0.2mm base.
2. The Charmander (and it's tail) portion of the print (from 2.52mm to 165mm height) should be printed at 5% infill with 3 walls, 3 top and 3 bottom surfaces and at 0.16mm layer height. You can use a layer height modifier to set these settings or edit the per-object settings.

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA CC3D Orange Transmission Distance: 7.4
PLA CC3D Lemon Yellow Transmission Distance: 8
PLA Kingroon White Transmission Distance: 8

Swap Instructions:
Start with Black
At 1.08mm swap to Orange
At 1.64mm swap to Lemon Yellow
At 1.96mm swap to White

At 2.52mm swap to Orange (for the Charmander!)

Post Processing:

You'll need to paint Charmander's eyes and body yourself (I didn't, I got lazy), but that shouldn't take too much time! I suggest using a paint pen if you're finding it hard to use paint brushes!

The Charmander STL itself was obtained from here, uploaded by user ClassyGoat.

____________________________________

Commercial License to Sell Prints

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

____________________________________

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.