Deploy

cover

plate_1.png

IMG_0352.webp

plate_1.webp

plate_2.webp

A multipart drywall mount that can be oriented to print for optimal strength. Printed at layer heights of 0.2mm and 0.28mm and both work fine. (It is a tight fit for the parts but that is exactly what we need for its application) PLA works, but PETG may be a little better to print with. Ideally, you want to print at 100% infill, but printing at 3+ perimeters will probably take care of that for you, depending on your slicer.

PLA 0.2mm layer, 2 walls, 100% infill

A multipart drywall mount that can be oriented to print for optimal strength.&nbsp;Printed at layer heights of 0.2mm and 0.28mm and both work fine. (It is a tight fit for the parts but that is exactly what we need for its application) PLA works fine, but PETG may be a little better to print with. Ideally, you want to print at 100% infill, but printing at 3+ perimeters will probably take care of that for you, depending on your slicer.

PETG 0.2mm layer, 2 walls, 100% infill

Printable Drywall Mount

A multipart drywall mount that can be oriented to print for optimal strength. Printed at layer heights of 0.2mm and 0.28mm and both work fine. (It is a tight fit for the parts but that is exactly what we need for its application) PLA works, but PETG may be a little better to print with. Ideally, you want to print at 100% infill, but printing at 3+ perimeters will probably take care of that for you, depending on your slicer.

Print Profile(2)

Description

Comment & Rating (13)

This remix is based on

License

Related Models