Mario Piranha Plant
Copyright Claim
Mario Piranha Plant
Boost
200
359
17
Print Profile(4)
0.08mm layer, 2 walls, 15% infill
Designer
4.5 h
1 plate
0.08mm layer, 2 walls, 15% infill
Designer
5.1 h
1 plate
Bambu Lab A1 mini 0.4 nozzle
42.7 h
1 plate
0.08mm layer, 2 walls, 15% infill
51.4 h
1 plate
Boost
200
359
17
1
623
133
Released
Description
Piranha plant from Mario!
Tips: Make sure to print large enough to be able to remove all supports. Remove the supports from the head first whilst the rest of the model is still supported. Take your time removing them and it comes out great!
Great one for a colour print.
Comment & Rating (17)
All
Print Profile
Bambu Lab A1 mini 0.4 nozzle
Support Issue:grid supports made this take 48 hours to print along with the massive prime tower! the supports in the mouth were very difficult to remove and as a result lost some teeth, it was a very delicate process but it came out decently.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
good model
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Printed well except the lips portion. Failed twice on the lips. added supports and it came out fine.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
leafs don’t seem to fit into place, I’m not sure how to get everything to fit together even with lots of glue? anybody have any ideas?
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
ansich ein schönes Modell, druckt man es jedoch aus der App, sind die Supports kaum zu entfernen.hier vielleicht besser Tree Supports wählen.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
lots of support
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
Support Issue:hard support remove without destroying the teeth
0
Reply
Print Profile
Bambu Lab A1 mini 0.4 nozzle
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld