Search models, users, collections, and posts
Knurled Stackable Pill Case
IP Report
Print Profile(4)
Scaled to 110% 0.16mm layer, 2 walls, 15% infill
Designer
5 h
1 plate
Scaled to 150%, 0.16mm layer, 2 walls, 15% infill
Designer
7.6 h
1 plate
Extra small 80% scale, 0.16mm layer, 2 walls, 15% infill
2.6 h
1 plate
Small 95% scale, 0.16mm layer, 2 walls, 15% infill
3.8 h
1 plate
Open in Bambu Studio
Boost
222
595
88
68
962
863
Released
Description
These stackable pill containers can be configured with as many pill containers as needed.
Print multiples of the middle section to add more containers to a stack. I like to use different colors for each pill type and/or day of the week.
These prints do not require any support and should be printed oriented as shown in the photo of it dissasembled. No other unique settings are required.
After printing you may need to “work” the threads a few times by screwing and unscrewing them until smooth. I like to rub a little wax on the threads to make them turn smoothly.
These can be scaled up to a certain degree to make bigger or more minor cases. At about 150% the threads start to get challenging overhangs.
Comment & Rating (88)