This is an artwork made using HueForge, which realistically presents butterfly specimens.
Suitable for this 150x150mm frame. https://makerworld.com/en/models/57319
This artwork requires three colors of filament: black, white and gray.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #11 (0.96mm) swap to Jade White for the rest.