Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.1 h
1 plate
Open in Bambu Studio
Boost
0
8
0
0
4
0
Released
Description
Simple 2mm thick large format bookmark.
Project: Ninja-BM.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 76.31x245mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gold
At layer #16 (1.36mm) swap to Silver
At layer #20 (1.68mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)