Owl

Just an owl.

The frame is made with frame generator for HueForge by Girouxra.

https://makerworld.com/en/models/514362#profileId-430525

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x109.69mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Filafarm Gorilla Black Mat Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA Prima Value Light gray Transmission Distance: 5
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 4 unique filaments

Swap Instructions:
Start with Gorilla Black Mat
At layer #12 (1.04mm) swap to Fossil Grey
At layer #18 (1.52mm) swap to Light gray
At layer #23 (1.92mm) swap to Cotton White for the rest.