This is a different take on the standard purge (poop) chute and bucket. Let your little ghosts slide or drop into the ghost trap, with handle for easy removal and dumping. 2 options available - 1 with the containment unit for those that put their ghost trap behind the printer, and 1 with a slide for those that want their ghost trap on the side.

Notes:

• Ghost trap is meant to be assembled with glue. This was done to keep purge and print time to a minimum. Flat design meant to accommodate tight placement against printer.
• This has been broken out into 5 different build plates to limit each to 4 colors per plate for those with only 1 AMS.
• Smooth PEI recommended for the side panels and doors; just gives a nicer finish.
• Need to use 2 15x3 magnets for the slide.
• Need to use one of the longer M3 course threaded screws (or similar) from the scraper kit that came with the printer to hang the containment unit chute.
• Supports required for containment unit chute and part of the handle.
• Vent holes in side of containment unit chute to keep from impeding any airflow to the vents on back of printer.
• Please note the build plates are preselected. If you want to use a different build plate, please ensure you click the nut icon next to the build plate to change.