Summary

This is a dead simple printed add-on for the Tool Box for Creality K1 (New V3) by ATAMAN found at https://www.crealitycloud.com/model-detail/652d73835b02def31661d2d3
This is simply to add a box onto the front of this model (v1 tested) that can be clipped onto it to hold the glue and grease sent with the K1. A simple print that took 34.5g of filament and 44m on the K1 with the default settings.
Supports are needed for 1 overhang although in my case I forgot them, and it didn’t come up too badly at all.
All credit to the base toolbox designer and I strongly recommend checking them out.

Print Settings

Printer Brand:

Creality

                                            Printer:                      
K1

Rafts:

                                            Supports:                      
Yes

Resolution:

0.2

                                            Infill:                      
5-20%

Filament:

ESUN PLA +

                Peak Green                    
                        Notes:                     
Printed with fully default K1 Settings from Creality slicer forgetting to add on supports in my case it still worked fine.