Create Your Own Custom Filament Colors! (No AMS)
Print Profile(1)
Description
Warning: Before you begin this project, make sure you have good bed adhesion and tolerance. You don't want the filament clogging your printer. Glue is recommended, a brim is not. I take no responsibility in any possible damages done to your printer because of this print.
With this 3D printable filament roll you will be able to make your own color of filament!!! Pause the print half of the way up and switch out the filament to get a roll with two colors. When that roll is printed, the colors will mix together and make a unique color! Make sure to pick colors that will blend well together. The Short roll gets you about 10 grams and the Long roll gets you about 20 grams. The Benchy in the pictures was made with the Long 3D printed filament file. (Blue and Yellow) Have fun!
Shout out to Barefoot Brothers for helping me make this model!
Be sure to check out some of my other popular models!
The BamPoo - Filament Poop Catcher for A1/A1 Mini
Boost Me (for free)
If you like this model, please consider giving me a Boost! It would really help me out.
Recommended Settings:
Filament type: PLA
Layer height: Thin, about 0.15 mm
Speed: Slow, around 80mm/s
Infill: It's so small, it doesn't have any
Wall loops: 4
Support: No
Bed Adhesion: None
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)